Professional Roofer's Torch

This torch has been specifically designed and made for the application of modified bitumen membranes. Thanks to its powerful flame, this torch allows very good performance and a high out-put. It has been designed paying the greatest attention to safety and environmental aspects and also taking into consideration ergonomic factors and noise levels. It has got a fast lever and a main valve by which the flow of gas can be opened, cut off and regulated to the low point.  This model is fitted up with a head which allows a very high output. The valves are made of brass while the hand-wheel is made of plastic. It is flame-welded with a silver/copper alloy and each part is tested very carefully The whole range is available both in standard version and with optional accessories.

Piezoelectric Ignition

It is very handy to light the torch because it avoids gas dispersion and losses of time to the user.

Swivel connection

This connection is designed to avoid twisting the gas hose during torching operations and to prevent the torch from becoming heavier and unstable.

Stand

It is possible to put down the torch with the bell upwards by using the stand in order to avoid the contact of the flame with the surface to be heated.

Pressure regulator with safety valve

The pressure regulator is equipped with a safety valve which hermetically stops the gas flow from the gas cylinder in case of breaking or bursting of the rubber hose. When the leak is detected, the regulator will be restored to service by pressing a release button.

Protective coil

The protective coil prevents the gas hose from bending and cutting at its weakest point, that is the connection with the torch. It is fitted as standard in all the models.