Rhinovent Breather Membranes
Rhinovent Breathable Roof Tile underlays are a composite structure, manufactured by lamination of a water vapour permeable film between two layers of non woven spun bond polypropylene to form a flexible, vapour permeable, roof tile underlay for unsupported and fully supported specifications.
Rhinovent Breathable Roof Tile underlays are suitable for use in warm non-ventilated and cold ventilated pitched roof systems and available in two weights.
As part of a complete roof, the product will resist the passage of water and
wind-blown snow and dust into the interior of the building. Risk of condensation - the product can be
regarded as a low water vapour resistance (Type LR) underlay and can be used as part of a
non-ventilated warm and ventilated cold, roof system.
When installed on appropriately spaced battens the products’ physical properties are deemed adequate to resist the wind loads imposed on the underlay. The product will reduce the wind uplift forces acting on the
The product has adequate strength to resist the loads associated with the installation of the roof.
Under the normal conditions found in a roof space the product will have a service life
comparable to a traditional roof tile underlay.
Rhinovent Ultra - 1m x 50m and 1.5m x 50m
Rhinovent Pro - 1m x 25m, 1 x 50m and 1.5 x 50m
Rhinovent Super - 1m x 50m, 1.5m x 50m
Dedicated To Supporting Builder's Merchants
Permeable Roof Tile Underlay - Guide to Good Site Practice
Roofing Felt Support Tray