manholecovers

Dedicated To Supporting Builder's Merchants

Linked Products

Drainage Channel

Composite Manhole Covers

B125 450mm Diameter Inspection Chamber Covers B125 Square to round 450mm

 

Composite Covers feature all new resin technology which gives them huge advantages over ductile iron.

 

  • Reduced weight
  • Increased lifespan
  • Lower vibration transmissions
  • Higher fatigue endurance limit

Pressed Steel ( General )

Standard rectangular top manhole covers are manufactured in 6 standard grades,in carrying capacities from 2.5 tonnes to 38 tonnes gross plates vehicle weight, and forklift grade to special order. Each grade is available in a range of clear opening sizes and special covers for heavy duty applications are available to order.

  • Dimensions

Manhole Covers

Polypropylene Manhole Covers

450mm diameter, light weight and easy to install domestic inspection covers, these covers are lockable with self tapping screws as per the relevant building regulations. Available from stock in single or pallet quantities. 35Kn for driveway applications.

Also available in 300mm (pedestrian weight only)

  • Dimensions

Tray Type Double Seal

These manhole covers have been specially designed for use where appearance is of most importance. The cover can be filled with self levelling compound or mortar and finished with tiles to match the surrounding floor, leaving only the frame and locking particularly suitable for internal use.

  • Dimensions

Recessed Type for Block Paving

These manhole covers have been specially designed for use in conjunction with block paving to give an almost hidden appearance, Available from stock in domestic capacity only, these covers can be produced in heavier versions to suit all applications. Manufactured from welded mild steel, and then galvanised.

  • Dimensions

Double Seal - Screw Flat Top

Used for manholes and inspection chambers on drains and sewers they are suitable for use internally and externally. Covers are made from pressed steel incorporating a non slip surface and dished lifting holes. Frames are made from cold rolled mild steel section, mitred and welded at the corners.

Ductile Iron Range

Used for manholes and inspection chambers on drains and sewers they are suitable for use internally and externally. Covers are made from pressed steel incorporating a non slip surface and dished lifting holes. Frames are made from cold rolled mild steel section, mitred and welded at the corners.

Heavy Duty stop cock box 6" by 5"                4kg

Cast Iron Stop Box Tap Boxes 125 x 150mm

A15 Cast 600 x 450mm MHC&F

Cast Iron pedestrian manhole cover and frame, single seal

B125 Ductile MHC&F

Chamber cover ductile iron, single seal

 

600mm x 450mm

600mm x 600mm

320mm dia

450mm dia

600mm dia

C250 GA2 325 Gully Ductile Kite Marked

Ductile Iron hinged gully grid

EN124 D400 600x600 Ductile Kite Marked

Double triangular heavy duty manhole cover and frame

Lifting Keys

Manhole lifting keys - available in pairs of light duty and heavy-duty types.

Contact Information

  • Terms & Conditions

 

Phone: 01709 728150

 

 

01709 724975

 

 

Address: Barbot Hall Industrial Estate, Mangham Road, Rotherham, S61 4RJ

 

Sales Fax No:

 

 

Email:  sales@pbpltd.co.uk