Guardian Torch On Tanking Membrane
Techno Guardian is a highly puncture resistant bitumen polymer torch applied tanking membrane combining the best characteristics of a waterproofing layer, bonding for insulation, drainage and built in protection properties.
This unique combination of characteristics is made possible because of the dimples on the upperside of the membrane. These dimples aid drainage, and provide adhesion points for insulation or protection board where required. Techno Guardian can be used on horizontal and vertical surfaces.
Product Literature Downloads
Techno Guardian should be fully bonded by propane torch application to a pre-primed surface. (solvent based bitumen primer is available for this purpose)
Rolls should be overlapped along the length using the self edge.
To achieve an effective seal on the end laps,
a 20cm wide bonding strip of Sappi 4kg APP sanded torch on should first be bonded to the substrate and the TECHNO GUARDIAN butt joined over the centre of the bonding strip.
Should it be required, the dimples on the membrane can be melted with a moderate torching action and insulation or protection board can then be adhered to them.
Tanking membranes for foundations and walls. CE marked to EN 13969
Technical Information
Techno Guardian is an elastoplastomeric polymer bitumen membrane (BPP) compound in distilled bitumen with high molecular weight polymer, reinforced with non woven spun bond polyester fabric and stabilised with glass. The surface is enhanced with a pattern
of elliptical dimples covered with a thermofusible PE film.
Application
Field of Application
Dedicated To Supporting Builder's Merchants
Groundwork
Weed Control & Geotextiles
Stratacheck
Fixings
Ancillaries
Roofing
Technical Data
Description
EN DRC
Unit
Value
Tolerance
Visible Defects
EN 1850-1
-
pass
-
Areic Mass
EN 1849-1
kg/m
5.0
-10%
Width and Length
EN 1848-1
m
1.0W, 7.50L
-1%
Straightness
EN 1848-1
mm
max 15
pass
Max Tensile Force L_T
EN 12311-1
N/5cm
750L, 550T
-20%
Elongation L_T
EN 12311-1
%
40L, 4OT
Tear Resistance L_T
EN 12310-1
N/5cm
150L, 150T
-30%
Static Loading Resistance
EN 12730-A
kg
15
pass
Dynamic loading Resistance
EN 12691
mm
800
pass
Flexibility
EN 1109
0c
-10
pass
Water Resistance
EN 1928
kPa
60
pass
Water Vapour Permeability (new)
EN 1296
u x 1.000
-
-
Temperature Stability L_T
EN 1110
0c
120
pass
Temperature Stability L_T
EN 1107-1
%
-0.25L, -0.15T
pass
Temperature Stability L_T
EN 13501-5
class
F
-
Temperature Stability L_T
EN 13505-1
class
F
-
Contact Information
Address: Barbot Hall Industrial Estate, Mangham Road, Rotherham, S61 4RJ
Phone: 01709 728150
01709 724975
Sales Fax No:
Email: sales@pbpltd.co.uk
- Terms & Conditions
Facebook Page
- Modern Slavery Statement
- REACH Regulations for PU products